Limit your search
Tags
Publication Date
- 1955 (65)
Laboratory
- Materials Laboratory (65)
Report Availability
- Full text available (65)
65 reports
The Effect Of Surface Finishes On Friction And Fusion Of Parachute Cloth And Line
Author(s): Vasilis Lavrakas; Adolph Katz Corporate Author: Lowell Technological Institute Research Foundation Laboratory: Materials Laboratory Date of Publication: 1955-12 Report Number: WADC TR 54-323 Part 1
The Effect Of Surface Finishes On Friction And Fusion Of Parachute Cloth And Line
Author(s): Vasilis Lavrakas; Adolph Katz Corporate Author: Lowell Technological Institute Research Foundation Laboratory: Materials Laboratory Date of Publication: 1955-10 Report Number: WADC TR 54-323 Part 2
Determination Of Resin Content Of Glass Fiber-Polyester Laminates Containing A Calcium Carbonate Filler
Author(s): S. D. Toner Corporate Author: National Bureau Of Standards Laboratory: Materials Laboratory Date of Publication: 1955-03 Report Number: WADC TR 54-326
Pile Fabrics For Insulation
Author(s): Charles W. Long Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-06 Report Number: WADC TR 54-374
Procedure For Determining Vapor Pressures Of Materials Of Low Volatility
Author(s): O. M. Ballentine Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-02 Report Number: WADC TR 54-418
Stabilization Of Polymethyl Alpha-Chloroacrylate Plastic Sheet
Author(s): Harry D. Anspon Corporate Author: General Aniline And Film Corporation Laboratory: Materials Laboratory Date of Publication: 1955-08 Report Number: WADC TR 54-465
Electrodeposition Of Titanium
Author(s): Walter E. Reid, Jr.; Joseph M. Bish; Abner Brenner Corporate Author: National Bureau Of Standards Laboratory: Materials Laboratory Date of Publication: 1955-02 Report Number: WADC TR 54-485 Part 1
Stress-Rupture, Fatigue And Notch Sensitivity Properties Of High Temperature Alloys Part 1. S-816 Alloy
Author(s): Franz H. Vitovec; Benjamin J. Lazan Corporate Author: University Of Minnesota Laboratory: Materials Laboratory Date of Publication: 1955-02 Report Number: WADC TR 54-488 Part 1
Research On Heat-Resistant Acrylate-Siloxane Elastomers
Author(s): Robert P. Cox; Ralph W. Buetow; Luther L. Yaeger Corporate Author: Bj0rksten Research Laboratories, Inc. Laboratory: Materials Laboratory Date of Publication: 1955-02 Report Number: WADC TR 54-525
Investigation Of Materials Fatigue Problems Applicable To Propeller Design
Author(s): H. N. Cummings; F. B. Stulen; W. C. Schulte Corporate Author: Curtiss-Wright Corporation, Propeller Division Laboratory: Materials Laboratory Date of Publication: 1955-10 Report Number: WADC TR 54-531 Supplement 1
High Temperature Hydraulic Fluids
Author(s): Edward S. Blake; James W. Edwards; William C. Hammann Corporate Author: Monsanto Chemical Company Laboratory: Materials Laboratory Date of Publication: 1955-03 Report Number: WADC TR 54-532
Research On Treated Magnesium Surfaces
Author(s): Stanley E. Rohowetz Corporate Author: Bjorksten Research Laboratories Laboratory: Materials Laboratory Date of Publication: 1955-07 Report Number: WADC TR 54-568
Design And Development Of A Heavy Weight High Impact Shock Machine
Author(s): Edward N. Sabbagh; Arthur S. Quint Corporate Author: Lowell Technological Institute, Research Foundation Laboratory: Materials Laboratory Date of Publication: 1955-11 Report Number: WADC TR 54-573
A Study Of The Effects Of Fabric Geometry Variables On Air Permeability
Author(s): William O. Perry Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-11 Report Number: WADC TR 54-574
Effect Of Metals On Lubricants Part 1. Designer Development And Instrumentation Of A High Temperature Bath
Author(s): Vernon A. Lauer Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-02 Report Number: WADC TR 54-576 Part 1
Evaluation Of Organic Fluorine Compounds For Use In Military Aircraft
Author(s): Harold Rosenberg; J. C. Mosteller Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-04 Report Number: WADC TR 54-580
Powder Fabrication Of Aluminum Alloys
Author(s): J. B. Hess; R. S. Mateer Corporate Author: Department Of Metallurgical Research, Kaiser Alulminum And Chemical Corporation Laboratory: Materials Laboratory Date of Publication: 1955-09 Report Number: WADC TR 54-590
Spectrophotometric-Cuprethol Method For The Quantitative Determination Of Copper In Aviation Fuels
Author(s): O. M. Ballantine Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-05 Report Number: WADC TR 54-596
A Modified Adiabatic Calorimeter
Author(s): Myron W. Belaga, 1st Lt, Usaf; David Coddington, 1st Lt, Usaf; Hyman Marcus Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-03 Report Number: WADC TR 54-601
Spot-Welded Joints In Titanium Alloys And Their Behavior In Fatigue
Author(s): William H. Kearns; Walter S. Hyler; David C. Martin Corporate Author: Battelle Memorial Institute Laboratory: Materials Laboratory Date of Publication: 1955-03 Report Number: WADC TR 54-609
Evaluation Of Non-Woven Glass Fiber Reinforcements For Low Pressure Molded polyester Resins For Aircraft Applications
Author(s): F. W. Reinhart, M. F. Toompas, M. C. Stone, I. Wolock Corporate Author: National Bureau Of Standards Laboratory: Materials Laboratory Date of Publication: 1955-05 Report Number: WADC TR 54-540
Development Of Wrought And Cast Alloys For High Temperature Applications
Author(s): R. R. Macfarlane; R. S. Defries; E. E. Reynolds; W. W. Dyrkacz Corporate Author: Allegheny Ludlum Steel Corporation Laboratory: Materials Laboratory Date of Publication: 1955-04 Report Number: WADC TR 55-23
Tensile Properties And Rheotropic Behavior Of Titanium Alloys And Molybdenum
Author(s): E. J. Ripling Corporate Author: Case Institute Of Technology Laboratory: Materials Laboratory Date of Publication: 1955-05 Report Number: WADC TR 55-5
Increasing The Ratio Of Modulus Of Elasticity To The Density Of Titanium Alloys
Author(s): William H. Graft, David W. Levinson, William Rostoker Corporate Author: Armour Research Foundation Laboratory: Materials Laboratory Date of Publication: 1955-11 Report Number: WADC TR 55-147
Weathering Of Adhesive-Bonded Lap Joints Of Clad Aluminum Alloy
Author(s): H. W. Eickner Corporate Author: Forest Products Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-02 Report Number: WADC TR 54-447 Part 1
Transparent Electrically Conducting Coatings For The Reduction Of Precipitation Static In Aircraft
Author(s): L. Harold Bullis Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-04 Report Number: WADC TR 54-452
Electrodeposition Of Titanium
Author(s): Walter E. Reid, Jr.; C. Agnes Gaudette; Abner Brenner Corporate Author: National Bureau Of Standards Laboratory: Materials Laboratory Date of Publication: 1955-04 Report Number: WADC TR 54-485 Part 2
Scaling Of Titanium And Titanium Alloys
Author(s): H. J. Siegel; R. C. Duncan, Jr.; R. E. Swift Corporate Author: Department Of Mining & Metallurgical Engineering, University Of Kentucky Laboratory: Materials Laboratory Date of Publication: 1955-11 Report Number: WADC TR 54-109 Part 2
Effect Of Strain Rate On The Strength Properties Of Single And Multiple Riveted Lap And Butt Joints
Author(s): Richard F. Klinger Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-02 Report Number: WADC TR 54-122
Development Of High-Temperature Oil-Resistant Rubber
Author(s): William J. Mueller; Louis E. Novy; Richard A. Clark; Randall G. Heiligmann Corporate Author: Battelle Memorial Institute Laboratory: Materials Laboratory Date of Publication: 1955-04 Report Number: WADC TR 54-190 Part 2
Development Of High-Temperature Oil-Resistant Rubber
Author(s): William J. Mueller; Louis E. Novy; Richard A. Clark; Randall G. Heiligmann Corporate Author: Battelle Memorial Institute Laboratory: Materials Laboratory Date of Publication: 1955-12 Report Number: WADC TR 54-190 Part 3
Development Of Improved Titanium-Base Alloys
Author(s): Herbert A. Robinson; W. Maxwell Parris; Paul D. Frost Corporate Author: Battelle Memorial Institute Laboratory: Materials Laboratory Date of Publication: 1955-06 Report Number: WADC TR 54-205 Part 2
Elevated-Temperature Testing Procedures, Part 1. Continuous Recording Of Time-Deformation Readings During Creep-Rupture Testing At Temperatures Up To 1200 Of
Author(s): William H. Rector; Charles A. Townsley Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-02 Report Number: WADC TR 54-214 Part 1
Investigation Of The Effect Of Raw Material Production Variables On The Physical And Chemical Properties Of Carbides, Nitrides And Borides
Author(s): H. Blumenthal Corporate Author: American Electro Metal Corporation Laboratory: Materials Laboratory Date of Publication: 1955-06 Report Number: WADC TR 54-13 Part 2
Research For Low-Application-Temperature, Electrically Conducting, Transparent Coatings For Aircraft Windshields And Related Components
Author(s): E. R. Olson; P. Schall, Jr.; E. H. Layer; E. H. Lougher; R. E. Heiks Corporate Author: Battelle Memorial Institute Laboratory: Materials Laboratory Date of Publication: 1955-01 Report Number: WADC TR 54-325
Vulcanization Of Rubber With High-Intensity Gamma Radiation
Author(s): Wallace W. Jackson; Denver Hale Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-04 Report Number: WADC TR 55-57
Fatigue Crack Detection Methods
Author(s): L. J. Demer Corporate Author: University Of Minnesota Laboratory: Materials Laboratory Date of Publication: 1955-06 Report Number: WADC TR 55-86 Part 2
Physical And Chemical Laboratory Evaluation Of Experimental Silicate Base High Temperature Hydraulic Fluids. Part I. Monsanto Fluid
Author(s): Oliver M. Ballentine, Harry M. Schiefer, Donald C. Trop Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-09 Report Number: WADC TR 55-89 Part 1
Physical And Chemical Laboratory Evaluation Of Experimental Silicate Base High Temperature Hydraulic Fluids. Part II, Hollingshead Fluid
Author(s): Oliver M. Ballentine, Harry M. Schiefer, Donald C. Trop Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-11 Report Number: WADC TR 55-89 Part 2
Corrosion Studies In Fuming Nitric Acid
Author(s): Edson H. Phelps, Fredrick S. Lee, Raymond B. Robinson Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-10 Report Number: WADC TR 55-109
Materials-Property-Design Criteria For Metals. Part 2: A Study Of Methods Of Presenting Creep Data For Airframe Design
Author(s): W. S. Hyler, H. J. Grover Corporate Author: Battelle Memorial Institue Laboratory: Materials Laboratory Date of Publication: 1955-11 Report Number: WADC TR 55-150 Part 2
Development And Evaluation Of A Grease -100 Degress F To +350 Degrees F
Author(s): Ernest W. Nelson, Warren W. Woods, C. Richard Bergen, William P. Scott and Richard Tillman Corporate Author: Continental Oil Company Laboratory: Materials Laboratory Date of Publication: 1955-07 Report Number: WADC TR 55-190 Part 1
Fluorine-Containing Polyethers
Author(s): Ogden R. Pierce; Donald D. Smith; Robert M. Murch Corporate Author: Dow Corning Corporation Laboratory: Materials Laboratory Date of Publication: 1955-06 Report Number: WADC TR 55-193
Development Of Fluoro-Silicone Elastomers
Author(s): Paul Tarrant Corporate Author: Peninsular Chemresearch, Inc. Laboratory: Materials Laboratory Date of Publication: 1955-08 Report Number: WADC TR 55-220
Research, Development, And Fabrication Of Siloxane-Acrylate Interlayer Material
Author(s): B. David Halpern, William Prosk, Leroy Tibery, John Isler, Jr., Wolf Karo Corporate Author: Monomer-Polymer The Borden Company-Chemical Division Laboratory: Materials Laboratory Date of Publication: 1955-12 Report Number: WADC TR 55-296
An Investigation Of The Feasibility Of Producing Metal Bonded Carbide Bodies By The Extrusion Process
Author(s): William W. Wellborn Corporate Author: Firth Sterling, Inc. Laboratory: Materials Laboratory Date of Publication: 1955-12 Report Number: WADC TR 55-327
Elevated- And Room-Temperature Properties Of Sierracin 611, PMACA, And Plexiglas 55 Transparent Plastic Sheet Materials
Author(s): John A. Venecho, Gale R. Remely And Ward F. Simmons Corporate Author: Battelle Memorial Institute Laboratory: Materials Laboratory Date of Publication: 1955-12 Report Number: WADC TR 55-412
Design Properties Of High-Strength Steels In The Presence Of Stress-Concentrations And Hydrogen Embrittlement Part I. Effects of Hydrogen Embrittlement on Static Properties of High-Strength Steels
Author(s): E. P. Klier; B. B. Muvdi; George Sachs Corporate Author: Syracuse University Laboratory: Materials Laboratory Date of Publication: 1955-05 Report Number: WADC TR 55-18 Part 1
Effects Of molding Pressure On The Strength Properties Of Several Types Of Glass-Fiber Reinforced Plastics
Author(s): Samuel D. Toner, Irvin Wolock And Frank W. Reinhart Corporate Author: National Bureau Of Standards Laboratory: Materials Laboratory Date of Publication: 1955-12 Report Number: WADC TR 55-256
Poly FBA, A Fluorinated Acrylic Elastomer For High Temperature Service In The Presence Of Aircraft Fuels And Lubricants
Author(s): Horace C. Hamlin Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-11 Report Number: WADC TR 55-381