Limit your search
Tags
Publication Date
- 1955 (144)
Laboratory
- Materials Laboratory (144)
Report Availability
144 reports
The Effect Of Surface Finishes On Friction And Fusion Of Parachute Cloth And Line
Author(s): Vasilis Lavrakas; Adolph Katz Corporate Author: Lowell Technological Institute Research Foundation Laboratory: Materials Laboratory Date of Publication: 1955-12 Report Number: WADC TR 54-323 Part 1
The Effect Of Surface Finishes On Friction And Fusion Of Parachute Cloth And Line
Author(s): Vasilis Lavrakas; Adolph Katz Corporate Author: Lowell Technological Institute Research Foundation Laboratory: Materials Laboratory Date of Publication: 1955-10 Report Number: WADC TR 54-323 Part 2
Determination Of Resin Content Of Glass Fiber-Polyester Laminates Containing A Calcium Carbonate Filler
Author(s): S. D. Toner Corporate Author: National Bureau Of Standards Laboratory: Materials Laboratory Date of Publication: 1955-03 Report Number: WADC TR 54-326
Pile Fabrics For Insulation
Author(s): Charles W. Long Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-06 Report Number: WADC TR 54-374
Procedure For Determining Vapor Pressures Of Materials Of Low Volatility
Author(s): O. M. Ballentine Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-02 Report Number: WADC TR 54-418
Stabilization Of Polymethyl Alpha-Chloroacrylate Plastic Sheet
Author(s): Harry D. Anspon Corporate Author: General Aniline And Film Corporation Laboratory: Materials Laboratory Date of Publication: 1955-08 Report Number: WADC TR 54-465
Electrodeposition Of Titanium
Author(s): Walter E. Reid, Jr.; Joseph M. Bish; Abner Brenner Corporate Author: National Bureau Of Standards Laboratory: Materials Laboratory Date of Publication: 1955-02 Report Number: WADC TR 54-485 Part 1
Stress-Rupture, Fatigue And Notch Sensitivity Properties Of High Temperature Alloys Part 1. S-816 Alloy
Author(s): Franz H. Vitovec; Benjamin J. Lazan Corporate Author: University Of Minnesota Laboratory: Materials Laboratory Date of Publication: 1955-02 Report Number: WADC TR 54-488 Part 1
Research On Heat-Resistant Acrylate-Siloxane Elastomers
Author(s): Robert P. Cox; Ralph W. Buetow; Luther L. Yaeger Corporate Author: Bj0rksten Research Laboratories, Inc. Laboratory: Materials Laboratory Date of Publication: 1955-02 Report Number: WADC TR 54-525
Investigation Of Materials Fatigue Problems Applicable To Propeller Design
Author(s): H. N. Cummings; F. B. Stulen; W. C. Schulte Corporate Author: Curtiss-Wright Corporation, Propeller Division Laboratory: Materials Laboratory Date of Publication: 1955-10 Report Number: WADC TR 54-531 Supplement 1
High Temperature Hydraulic Fluids
Author(s): Edward S. Blake; James W. Edwards; William C. Hammann Corporate Author: Monsanto Chemical Company Laboratory: Materials Laboratory Date of Publication: 1955-03 Report Number: WADC TR 54-532
Research On Treated Magnesium Surfaces
Author(s): Stanley E. Rohowetz Corporate Author: Bjorksten Research Laboratories Laboratory: Materials Laboratory Date of Publication: 1955-07 Report Number: WADC TR 54-568
Design And Development Of A Heavy Weight High Impact Shock Machine
Author(s): Edward N. Sabbagh; Arthur S. Quint Corporate Author: Lowell Technological Institute, Research Foundation Laboratory: Materials Laboratory Date of Publication: 1955-11 Report Number: WADC TR 54-573
A Study Of The Effects Of Fabric Geometry Variables On Air Permeability
Author(s): William O. Perry Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-11 Report Number: WADC TR 54-574
Effect Of Metals On Lubricants Part 1. Designer Development And Instrumentation Of A High Temperature Bath
Author(s): Vernon A. Lauer Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-02 Report Number: WADC TR 54-576 Part 1
Evaluation Of Organic Fluorine Compounds For Use In Military Aircraft
Author(s): Harold Rosenberg; J. C. Mosteller Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-04 Report Number: WADC TR 54-580
Powder Fabrication Of Aluminum Alloys
Author(s): J. B. Hess; R. S. Mateer Corporate Author: Department Of Metallurgical Research, Kaiser Alulminum And Chemical Corporation Laboratory: Materials Laboratory Date of Publication: 1955-09 Report Number: WADC TR 54-590
Spectrophotometric-Cuprethol Method For The Quantitative Determination Of Copper In Aviation Fuels
Author(s): O. M. Ballantine Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-05 Report Number: WADC TR 54-596
A Modified Adiabatic Calorimeter
Author(s): Myron W. Belaga, 1st Lt, Usaf; David Coddington, 1st Lt, Usaf; Hyman Marcus Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-03 Report Number: WADC TR 54-601
Spot-Welded Joints In Titanium Alloys And Their Behavior In Fatigue
Author(s): William H. Kearns; Walter S. Hyler; David C. Martin Corporate Author: Battelle Memorial Institute Laboratory: Materials Laboratory Date of Publication: 1955-03 Report Number: WADC TR 54-609
Evaluation Of Non-Woven Glass Fiber Reinforcements For Low Pressure Molded polyester Resins For Aircraft Applications
Author(s): F. W. Reinhart, M. F. Toompas, M. C. Stone, I. Wolock Corporate Author: National Bureau Of Standards Laboratory: Materials Laboratory Date of Publication: 1955-05 Report Number: WADC TR 54-540
Development Of Wrought And Cast Alloys For High Temperature Applications
Author(s): R. R. Macfarlane; R. S. Defries; E. E. Reynolds; W. W. Dyrkacz Corporate Author: Allegheny Ludlum Steel Corporation Laboratory: Materials Laboratory Date of Publication: 1955-04 Report Number: WADC TR 55-23
Research On Boron Polymers. Part II. Polymer Studies
Author(s): William L. Ruigh; Charles E. Erickson; Frank Gunderloy; Michael Sedlak Corporate Author: Rutgers University Laboratory: Materials Laboratory Date of Publication: 1955-05 Report Number: WADC TR 55-26 Part 2
full text unavailable
Investigation Of Compressive-Creep Properties Of Aluminum Columns At Elevated Temperatures, Part 3. Comparisons With Other Metals
Author(s): R. L. Carlson; G. K. Manning Corporate Author: Battelle Memorial Institute Laboratory: Materials Laboratory Date of Publication: 1955-05 Report Number: WADC TR 52-251 Part 3
full text unavailable
Tensile Properties And Rheotropic Behavior Of Titanium Alloys And Molybdenum
Author(s): E. J. Ripling Corporate Author: Case Institute Of Technology Laboratory: Materials Laboratory Date of Publication: 1955-05 Report Number: WADC TR 55-5
High Strength Epon Laminates
Author(s): Frank C. Hopper Corporate Author: Shell Development Company Laboratory: Materials Laboratory Date of Publication: 1955-04 Report Number: WADC TR 52-5 Supplement 3
full text unavailable
Investigation Of The Metallurgical Characteristics Of The 36% Aluminum Titanium-Base Alloy
Author(s): J. B. Mcandrew; D. J. Mcpherson Corporate Author: Armour Research Foundation, Illinois Institute Of Technology Laboratory: Materials Laboratory Date of Publication: 1955-01 Report Number: WADC TR 53-182 Part 2
full text unavailable
Study Of Effects Of Alloying Elements On The Weldability Of Titanium Sheet
Author(s): Herbert M. Meyer Corporate Author: Armour Research Foundation, Illinois Institute Of Technology Laboratory: Materials Laboratory Date of Publication: 1955-06 Report Number: WADC TR 53-230 Part 2
full text unavailable
Evaluation Of High Strength Weldable Titanium-Base Alloys
Author(s): C. Robert Lillie Corporate Author: Armour Research Foundation, Illinois Institute Of Technology Laboratory: Materials Laboratory Date of Publication: 1955-12 Report Number: WADC TR 54-547
full text unavailable
Increasing The Ratio Of Modulus Of Elasticity To The Density Of Titanium Alloys
Author(s): William H. Graft, David W. Levinson, William Rostoker Corporate Author: Armour Research Foundation Laboratory: Materials Laboratory Date of Publication: 1955-11 Report Number: WADC TR 55-147
Thermal Conductivity And Heat Capacity Of Molten Materials Part 6. The Thermal Conductivity Of Beryllium Oxide From 40? To 750?c
Author(s): D. A. Ditmars; D. C. Ginnings Corporate Author: National Bureau Of Standards Laboratory: Materials Laboratory Date of Publication: 1955-10 Report Number: WADC TR 53-201 Part 6
full text unavailable
Development Of A Substitute Or Improvement Of Chromium Electrodeposits
Author(s): Jesse E. Stareck; Edgar J. Seyb, Jr.; Angelo C. Tulumello Corporate Author: United Chromium, Incorporated Laboratory: Materials Laboratory Date of Publication: 1955-03 Report Number: WADC TR 53-271 Part 2
full text unavailable
Development Of Molybdenum Nozzle Blades
Author(s): D. V. Doane Corporate Author: Climax Molybdenum Company Of Michigan Laboratory: Materials Laboratory Date of Publication: 1955-04 Report Number: WADC TR 55-96
full text unavailable
Weathering Of Adhesive-Bonded Lap Joints Of Clad Aluminum Alloy
Author(s): H. W. Eickner Corporate Author: Forest Products Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-02 Report Number: WADC TR 54-447 Part 1
Transparent Electrically Conducting Coatings For The Reduction Of Precipitation Static In Aircraft
Author(s): L. Harold Bullis Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-04 Report Number: WADC TR 54-452
Electrodeposition Of Titanium
Author(s): Walter E. Reid, Jr.; C. Agnes Gaudette; Abner Brenner Corporate Author: National Bureau Of Standards Laboratory: Materials Laboratory Date of Publication: 1955-04 Report Number: WADC TR 54-485 Part 2
Scaling Of Titanium And Titanium Alloys
Author(s): H. J. Siegel; R. C. Duncan, Jr.; R. E. Swift Corporate Author: Department Of Mining & Metallurgical Engineering, University Of Kentucky Laboratory: Materials Laboratory Date of Publication: 1955-11 Report Number: WADC TR 54-109 Part 2
Effect Of Strain Rate On The Strength Properties Of Single And Multiple Riveted Lap And Butt Joints
Author(s): Richard F. Klinger Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-02 Report Number: WADC TR 54-122
Development Of High-Temperature Oil-Resistant Rubber
Author(s): William J. Mueller; Louis E. Novy; Richard A. Clark; Randall G. Heiligmann Corporate Author: Battelle Memorial Institute Laboratory: Materials Laboratory Date of Publication: 1955-04 Report Number: WADC TR 54-190 Part 2
Development Of High-Temperature Oil-Resistant Rubber
Author(s): William J. Mueller; Louis E. Novy; Richard A. Clark; Randall G. Heiligmann Corporate Author: Battelle Memorial Institute Laboratory: Materials Laboratory Date of Publication: 1955-12 Report Number: WADC TR 54-190 Part 3
Development Of Improved Titanium-Base Alloys
Author(s): Herbert A. Robinson; W. Maxwell Parris; Paul D. Frost Corporate Author: Battelle Memorial Institute Laboratory: Materials Laboratory Date of Publication: 1955-06 Report Number: WADC TR 54-205 Part 2
Elevated-Temperature Testing Procedures, Part 1. Continuous Recording Of Time-Deformation Readings During Creep-Rupture Testing At Temperatures Up To 1200 Of
Author(s): William H. Rector; Charles A. Townsley Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-02 Report Number: WADC TR 54-214 Part 1
Investigation Of The Effect Of Raw Material Production Variables On The Physical And Chemical Properties Of Carbides, Nitrides And Borides
Author(s): H. Blumenthal Corporate Author: American Electro Metal Corporation Laboratory: Materials Laboratory Date of Publication: 1955-06 Report Number: WADC TR 54-13 Part 2
Research For Low-Application-Temperature, Electrically Conducting, Transparent Coatings For Aircraft Windshields And Related Components
Author(s): E. R. Olson; P. Schall, Jr.; E. H. Layer; E. H. Lougher; R. E. Heiks Corporate Author: Battelle Memorial Institute Laboratory: Materials Laboratory Date of Publication: 1955-01 Report Number: WADC TR 54-325
Development Of A Heat-Resistant Foamed-In-Place Low-Density Silicone Resin Core Material
Author(s): Donald E. Weyer; James R. Russell; Kenneth R. Hoffman Corporate Author: Dow Corning Corporation Laboratory: Materials Laboratory Date of Publication: 1955-01 Report Number: WADC TR 53-146 Supplement 1
full text unavailable
Vulcanization Of Rubber With High-Intensity Gamma Radiation
Author(s): Wallace W. Jackson; Denver Hale Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-04 Report Number: WADC TR 55-57
Development Of Nondestructive Tests For Structural Adhesive Bonds, Part 3. Mechanical Impedance Technique, "Stub-Meter'
Author(s): J. S. Arnold Corporate Author: Stanford Research Institute Laboratory: Materials Laboratory Date of Publication: 1955-04 Report Number: WADC TR 54-231 Part 3
full text unavailable
Research On Boron Polymers. Literature Survey
Author(s): William Ruigh; Charles E. Erickson Corporate Author: Rutgers University Laboratory: Materials Laboratory Date of Publication: 1955-03 Report Number: WADC TR 55-26 Part 1
full text unavailable
Fatigue Crack Detection Methods
Author(s): L. J. Demer Corporate Author: University Of Minnesota Laboratory: Materials Laboratory Date of Publication: 1955-06 Report Number: WADC TR 55-86 Part 2
Physical And Chemical Laboratory Evaluation Of Experimental Silicate Base High Temperature Hydraulic Fluids. Part I. Monsanto Fluid
Author(s): Oliver M. Ballentine, Harry M. Schiefer, Donald C. Trop Corporate Author: Materials Laboratory Laboratory: Materials Laboratory Date of Publication: 1955-09 Report Number: WADC TR 55-89 Part 1