71 reports
A Study of the Influence of Lubricants on High-Speed Rolling-Contact Bearing Performance: Part V. Research on Elastohydrodynamic Lubrication on High-Speed Rolling Contacts
Author(s): Kannel, Jerrold Corporate Author: Battelle Memorial Institute Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-07 Report Number: ASD TDR 61-643 Part 5
Research on Gas Lubrication at High Temperatures and Low Flow Rates
Author(s): Lewis, P. Corporate Author: Mechanical Technology, Inc. Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-03 Report Number: APL TDR 64-56 Part 2
Effects of Additives on the Storage Stability of High-Temperature Fuels
Author(s): Johnston, Robert K. Corporate Author: Southwest Research Institute Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1964-12 Report Number: AFAPL TR 64-142
Contaminant Freeze-Out In Heat Exchangers. Volume II - Basic Investigation Of Contaminant Freeze-Out
Author(s): Hinkley, R. B. Corporate Author: Arthur D Little, Inc. Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1963-07 Report Number: ASD TDR 63-508 Volume II
Contaminant Freeze-Out In Heat Exchangers. Volume III - Contaminant Freeze-Out Test Data
Author(s): Hinkley, R. B. Corporate Author: Arthur D Little, Inc. Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1963-07 Report Number: ASD TDR 63-508 Volume 3
Development of Space Expanded and Rigidized Solar Energy Collectors
Author(s): Schwartz, S. Corporate Author: Hughes Aircraft Company Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 555-571
Aluminum Foil Expandable Structures
Author(s): Motta, S. Corporate Author: Avco Corporation Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 572-602
Fabrication and Pressurization Technology for Improvement of Surface Accuracy of Passive Communications Satellites
Author(s): Grana, D. C. Corporate Author: NASA Langley Research Center Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 603-616
Astronaut Maneuvering Unit Technology
Author(s): Van Schaik, P. N. Corporate Author: Air Force Aero Propulsion Laboratory Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 633-648
Deployment System for the Pegasus Meteoroid Technology Satellite
Author(s): Ganssle, E. R. Corporate Author: Fairchild Hiller Corp. Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 649-657
Structural Behavior of Tapered Inflated Fabric Cylinders Under Various Loading Conditions
Author(s): Kovalesvsky, L. Corporate Author: North American Aviation, Inc. Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 659-685
Satellite Applications for Expandable Space Structures
Author(s): Zahn, H. S. Corporate Author: Martin Company Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 687-707
Recent Applications of Inflated Structures to Aerospace Vehicles
Author(s): Ross, R. S. Corporate Author: Good Year Space Corp. Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 709-739
Correlation of Analytical and Experimental Results of Cylindrical Shells Under Newtonian Pressure Distribution
Author(s): Lycurgus, N. C. Corporate Author: None Given Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 740-767
High-Temperature Protective Re-entry Coatings for Expandable Structures
Author(s): Conger, M. T. Corporate Author: None Given Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 769-783
Dual Wall Inflatable Structures for Space Oriented Applications
Author(s): Bair, H. Q. Corporate Author: Air Inflatable Products Corporation Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 785-802
Introduction and Table of Contents
Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. i-xiii
Membrane Analysis of Pressurized Thin Spheroid Shells Composed of Flat Gores and Its Application to Echo II
Author(s): Bahiman, H. Corporate Author: None Given Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 617-631
Project AHT
Author(s): Crawford, James E. Corporate Author: : Space-General Corp El Monte CA Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1967-03 Report Number: AFAPL TR 67-30
Stability of High-Temperature Hydrocarbon Jet Fuels During Storage
Author(s): Lander, Herbert R., Jr. Corporate Author: Air Force Aero Propulsion Laboratory Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1964-11 Report Number: APL TDR 64-107
Investigation of RF Radiation as a Secondary Phenomenon for Use in Checkout
Author(s): Ballard, James W. Corporate Author: Systems Research Laboratories, Inc. Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-06 Report Number: AFAPL TR 65-46
Development of High Temperature Seal-Lubricant Deposit Evaluation Techniques
Author(s): Pfoutz, Billy D. Corporate Author: Koppers Co Inc Monroeville PA Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-03 Report Number: AFAPL TR 65-3
Storage Stability Of High Temperature Fuels
Author(s): Whisman, M. L. Corporate Author: Bureau Of Mines Bartlesville Okla Petroleum Research Center Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1967-02 Report Number: AFAPL TR 65-13 Part 3
Rotor-Bearing Dynamics Design Technology. Part VII: The Three Lobe Bearing And Floating Ring Bearing
Author(s): Lund, J. W. Corporate Author: Mechanical Technology Inc Latham NY Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1968-02 Report Number: AFAPL TR 65-45 Part 7
Expandable Structures Design Concepts for Astronaut Transfer
Author(s): Jurich, L. Corporate Author: Aero Propulsion Laboratory; Aero Medical Laboratory; Aerospace Corporation; Goodyear Aerospace Corporation Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 1-18
Application of Expandable Honeycomb to Fabrication of Space Structures
Author(s): Russell, I. W. Corporate Author: GCA Corporation; Experimental Fabrication Division, WPAFB Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 50-73
Lightweight, Expandable Support Shelter Systems
Author(s): Alexander, J. M. Corporate Author: University of Cincinnati Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 75-103
Bare Base Development Concepts
Author(s): Merkel, K. H. Corporate Author: University of Cincinnati Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 104-139
'Ratio' Automated Assembly Technique for Space Structures
Author(s): Slysh, P. Corporate Author: General Dynamics/Convair Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 141-163
Chemical Rigidization of Preformed Flexible Foams
Author(s): Hanny, J. F. Corporate Author: National Cash Register Company Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 165-178
Maintenance Technology for Space Systems
Author(s): May, C. B. Corporate Author: Air Force Aero Propulsion Laboratory Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 179-197
Structural Considerations for an Expandable Lenticular Satellite
Author(s): Humble, J. L. Corporate Author: NASA Langley Research Center Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 199-213
Application of Inflatable Structures to Station Keeping of Passive Communications Satellites
Author(s): Cooper, J. E. Corporate Author: NASA Langley Research Center Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 215-233
Development of Manufacturing Techniques for a Metal Fabric Reinforced Re-entry Paraglider
Author(s): Keville, J. F. Corporate Author: Space-General Corporation Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 235-247
Bending of Unfurlable Tubular Structures in Space
Author(s): Herzl, G. G. Corporate Author: Philco Corporation Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 249-263
Development and Evaluation of a Rigidized Inflatable Microwave Reflector
Author(s): Gibson, K. F. Corporate Author: Computing Devices of Canada, Ltd.; Bendix Corporation Research Laboratories Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 265-287
Sodium Silicate as a Versatile Structural Material
Author(s): Hoffman, H. I. Corporate Author: Southwest Research Institute Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 289-303
Inflatable Thermal Radiation Shield for Space Application
Author(s): Marshall, J. E. Corporate Author: General Dynamics/Fort Worth Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 305-338
Predistributed Foam for Rigidizing Membrane Structures in Space
Author(s): Jouriles, N. Corporate Author: Goodyear Aerospace Corporation Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 339-361
Semi-rigid Structures for Space Applications: Expandable Space Structure
Author(s): Knox, P. M. Corporate Author: Martin Company Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 362-295
Buildings in Barrels, Part III
Author(s): Swensen, S.B. Corporate Author: U.S. Army Engineer Research and Development Laboratories Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 397-428
Metal Fabrics for Aerospace Expandable Structures
Author(s): Freeston, W. D., Jr. Corporate Author: Fabric Research Laboratories, Inc. Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 429-446
Simulation of Meteoroid Impact Effects on Expandable Structures
Author(s): Holten, A. J. Corporate Author: None Given Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 447-466
Development of an Expandable Airlock Utilizing the Elastic Recovery Principle
Author(s): Williams, J. Corporate Author: NASA Langley Research Center Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 467-496
Potential Applications for Expandable and Inflatable Structures for Re-entry Vehicles
Author(s): Wykes, R. P. Corporate Author: North American Aviation, Inc. Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 497-518
Design Criteria for Inflated, Expandable Beams Used as Structural Members in an Advanced Concept Paraglider
Author(s): Toni, R. A. Corporate Author: NASA Langley Research Center Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1965-05-27 Report Number: AFAPL TR 65-108 p. 537-554
Evaluation Of A Detector For Free Water In Fuel
Author(s): Johnston, Robert K. Corporate Author: Southwest Research Inst San Antonio TX Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1966-04 Report Number: AFAPL TR 66-39
Lubricity Properties Of High-Temperature Jet Fuels
Author(s): Appeldoorn, J. K. Corporate Author: Esso Research And Engineering Co Linden Nj Products Research Div Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1967-09 Report Number: AFAPL TR 66-89 Part 2
Bibliography: On-Board In-Flight Checkout. Part II. Literature Citations
Author(s): Johnson, James L. Corporate Author: IBM Federal Systems Div Owego Ny Electronics Systems Center Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1966-12 Report Number: AFAPL TR 66-130 Part 2
Research Investigation Of Hydraulic Pulsation Concepts
Author(s): None Given Corporate Author: Republic Aviation Corp Farmingdale N Y Laboratory: Air Force Aero Propulsion Laboratory Date of Publication: 1964-10 Report Number: APL TDR 64-109