Contrails
The goal of the Contrails project is to help preserve and disseminate the technical record of 20th century aerospace research, highlighting in particular the research endeavors of the Illinois Tech community.

Limit your search

Publication Date

Laboratory

Report Availability

55 reports

Lubrication Of Titanium

Author(s): Fatica, Nicholas
Corporate Author: Clevite Research Center, Division Of Clevite Corporation, Cleveland, Ohio
Laboratory: Materials Laboratory
Date of Publication: 1958-05
Report Number: WADC TR 57-61 Part 2
full text unavailable

Development And Evaluation Of Webbing Made From Nylon "6"

Author(s): Neff, Russell J.
Corporate Author: Phoenix Trimming Company
Laboratory: Materials Laboratory
Date of Publication: 1958-03
Report Number: WADC TR 57-538
full text unavailable

Airframe Lubricants Part II. Development Of A Laboratory Technique For Determining Rust-Preventive Properties Of Lubricating Greases


Corporate Author: Airframe Lubricants Group, Coordinating Research Council, Inc
Laboratory: Materials Laboratory
Date of Publication: 1958-07
Report Number: WADC TR 57-36 Part 2
full text unavailable

Effect Of Metals On Lubricants

Author(s): Christian, John B.
Corporate Author: Materials Laboratory
Laboratory: Materials Laboratory
Date of Publication: 1958-05
Report Number: WADC TR 54-576 Part 3
full text unavailable

The Effect Of Heat Treatment On The Stability And Creep Resistance Of a Ti-Al-Mo Alloy

Author(s): Gegel, Harold L.
Corporate Author: Materials Laboratory
Laboratory: Materials Laboratory
Date of Publication: 1958-01
Report Number: WADC TN 57-396
full text unavailable

Polymerization Studies On Monomers And Evaluation Of Deriviative Polymers

Author(s): Jones, Faber B.
Corporate Author: Battelle Memorial Institute
Laboratory: Materials Laboratory
Date of Publication: 1958-03
Report Number: WADC TR 57-110 Part 2
full text unavailable

An Investigation Of The Relationship Between Microstructure And Creep-Rupture Properties Of Heat-Resistant Alloys

Author(s): Coldren, A. Phillip
Corporate Author: Engineering Research Institute The University Of Michigan
Laboratory: Materials Laboratory
Date of Publication: 1958-07
Report Number: WADC TR 58-204
full text unavailable

The Compressive Creep Buckling Of Metal Columns, Part 5. Cyclic Loading

Author(s): Rudnick, A.
Corporate Author: Battelle Memorial Institute
Laboratory: Materials Laboratory
Date of Publication: 1958-06
Report Number: WADC TR 52-251 Part 5
full text unavailable

The Compressive Creep Buckling Of Metal Columns, Part 6. Effect Of Initial Imperfection

Author(s): Rudnick, Alfred
Corporate Author: Battelle Memorial Institute
Laboratory: Materials Laboratory
Date of Publication: 1958-10
Report Number: WADC TR 52-251 Part 6
full text unavailable

A Study Of Beta Embrittlement In High-Strength Titanium Alloys

Author(s): Griest, Andrew J.
Corporate Author: Battelle Memorial Institute
Laboratory: Materials Laboratory
Date of Publication: 1958-08
Report Number: WADC TR 58-161
full text unavailable

Strengths And Electrical Transmission Of Three Types Of Repairs To Sandwich Construction For Randomes

Author(s): Heebink, Bruce G.
Corporate Author: Forest Products Laboratory, Forest Service, U. S. Department Of Agriculture
Laboratory: Materials Laboratory
Date of Publication: 1958-05
Report Number: WADC TR 57-609
full text unavailable

Development Of A Heat Treatable Titanium Sheet Alloy

Author(s): Lillie, C. Robert
Corporate Author: Armour Research Foundation Of Illinois Institute Of Technology
Laboratory: Materials Laboratory
Date of Publication: 1958-08
Report Number: WADC TR 58-182
full text unavailable

Development Of High Tenacity-Heat Stable Dacron Parachute Items

Author(s): Chu, Chauncye C.
Corporate Author: Fabric Research Laboratories, Inc.
Laboratory: Materials Laboratory
Date of Publication: 1958-05
Report Number: WADC TR 57-765
full text unavailable

Heat Capacity Determination Of Mineral And Synthetic Engine Oils, Lubricants, Fuels And Hydraulic Fluids In The Temperature Range 70 - 500 F

Author(s): Barger, J. W.
Corporate Author: Midwest Research Institute
Laboratory: Materials Laboratory
Date of Publication: 1958-06
Report Number: WADC TR 58-70
full text unavailable

Investigation Of The High Intensity Arc Technique For Materials Testing

Author(s): Sheer, Charles
Corporate Author: Vitro Laboratories, Division Of Vitro Corporation Of America, West Orange Laboratory
Laboratory: Materials Laboratory
Date of Publication: 1958-11
Report Number: WADC TR 58-142
AD Number: AD0205364
full text unavailable

Development Of Oxidation And Liquid Sodium Resistant Brazing Alloys

Author(s): Canonico, Domenic A.
Corporate Author: Metals Research Dept., Armour Research Foundation
Laboratory: Materials Laboratory
Date of Publication: 1958-03
Report Number: WADC TR 57-648
full text unavailable

Research On Liquid Metals As Power Transmission Fluids

Author(s): Blackmer, Richard H.
Corporate Author: General Electric Company, Light Military Electronic Equipment Department.
Laboratory: Materials Laboratory
Date of Publication: 1958-02
Report Number: WADC TR 57-294
full text unavailable

Silicone Fluid Research For The Development Of High Temperature Hydraulic Fluids And Engine Oils

Author(s): Holdstock, Norman G.
Corporate Author: General Electric Company, Silicone Products Department
Laboratory: Materials Laboratory
Date of Publication: 1958-02
Report Number: WADC TR 56-168 Part 2
full text unavailable

Development Of Active-Eutectoid Base Alloys

Author(s): Bunshah, R. F.
Corporate Author: New York University
Laboratory: Materials Laboratory
Date of Publication: 1958-10
Report Number: WADC TR 58-328
full text unavailable

Development And Evaluation Services On Ceramic Materials And Wall Composites For High-Temperature Radome Shapes

Author(s): Dorsey, John J.
Corporate Author: P. R. Mallory & Co., Inc.
Laboratory: Materials Laboratory
Date of Publication: 1958-02
Report Number: WADC TR 57-665
full text unavailable

Evaluation Of Alloys For High Temperature Gear Applications

Author(s): Jackson, E. G
Corporate Author: General Electric Company
Laboratory: Materials Laboratory
Date of Publication: 1958-12
Report Number: WADC TR 58-546
full text unavailable

Tensile Properties Of Aircraft-Structural Metals At Various Rates Of Loading After Rapid Heating

Author(s): Dedman, Haywood E.
Corporate Author: Southern Research Institute
Laboratory: Materials Laboratory
Date of Publication: 1958-11
Report Number: WADC TR 58-440 Part 1
full text unavailable

An Evaluation Of Fungicidal Treatments In Cotton Cargo Parachute Webbings Stored At College, Alaska

Author(s): Little, Emma F.
Corporate Author: Materials Laboratory
Laboratory: Materials Laboratory
Date of Publication: 1958-08
Report Number: WADC TR 56-384 Part 2
full text unavailable

Effect of Prior Creep on Mechanical Properties of Aircraft Structural Metals. Part III. C110M Titanium Alloy

Author(s): Gluck, Jeremy V.
Corporate Author: University of Michigan
Laboratory: Materials Laboratory
Date of Publication: 1958-05
Report Number: WADC TR 57-150 Part 3
full text unavailable

Design Data For O-Rings And Similar Elastic Seals

Author(s): Tipton, Frank W.
Corporate Author: Boeing Airplane Company
Laboratory: Materials Laboratory
Date of Publication: 1958-04
Report Number: WADC TR 56-272 Part 3
full text unavailable

Design Data For O-Rings And Similar Elastic Seals

Author(s): Tipton, Frank W.
Corporate Author: Boeing Airplane Company
Laboratory: Materials Laboratory
Date of Publication: 1958-04
Report Number: WADC TR 56-272 Part 4
full text unavailable

An Investigation Of The Effects Of Impurities And Metallurgical Variables On The Notch Sensitivity Of Titanium Alloys

Author(s): Holden, Frank C.
Corporate Author: Battelle Memorial Institute
Laboratory: Materials Laboratory
Date of Publication: 1958-12
Report Number: WADC TR 58-438
full text unavailable

Development Of Thermally Stable Silicon Containing Resins

Author(s): Breed, L. W.
Corporate Author: Midwest Research Institute
Laboratory: Materials Laboratory
Date of Publication: 1958-02
Report Number: WADC TR 57-143 Part 2
full text unavailable

Determination Of Emissivity And Reflectivity Data On Aircraft Structural Materials Part II: Techniques For Measurement Of Total Normal Emissivity, Normal Spectral Emissivity, Solar Absoptivity And Presentation Of Results

Author(s): Betz, Howard T.
Corporate Author: Armour Research Foundation
Laboratory: Materials Laboratory
Date of Publication: 1958-10
Report Number: WADC TR 56-222 Part 2
AD Number: AD0202493
full text unavailable

Investigation Of Effects Of Radiation Applicable As Gamma Radiation Dosimeters

Author(s): Kircher, J. F.
Corporate Author: Battelle Memorial Institute
Laboratory: Materials Laboratory
Date of Publication: 1958-07
Report Number: WADC TR 58-158
full text unavailable

The Development Of Fibrous Glasses Having High Elastic Moduli

Author(s): Waugh, J. A.
Corporate Author: Owens-Corning Fiberglas Corporation Newark, Ohio
Laboratory: Materials Laboratory
Date of Publication: 1958-05
Report Number: WADC TR 55-290 Part 2
full text unavailable

Determination Of Materials Design Criteria For 6A1-4V Titanium Alloy At Room And Elevated Temperatures

Author(s): Childs, J. K.
Corporate Author: Southwest Research Institute
Laboratory: Materials Laboratory
Date of Publication: 1958-08
Report Number: WADC TR 58-246
full text unavailable

Effect Of Prior Creep On Mechanical Properties Of Aircraft Structural Metals

Author(s): Gluck, Jeremy V.
Corporate Author: Engineering Research Institute The University Of Michigan
Laboratory: Materials Laboratory
Date of Publication: 1958-02
Report Number: WADC TR 57-150 Part 1
full text unavailable

Effect Of Prior Creep On Mechanical Properties Of Aircraft Structural Metals

Author(s): Gluck, Jeremy V.
Corporate Author: Engineering Research Institute The University Of Michigan
Laboratory: Materials Laboratory
Date of Publication: 1958-04
Report Number: WADC TR 57-150 Part 2
full text unavailable

Measurement Of Some Thermal Properties Of Three Glasses

Author(s): Melonas, John V.
Corporate Author: Southern Research Institute
Laboratory: Materials Laboratory
Date of Publication: 1958-08
Report Number: WADC TR 58-129
full text unavailable

The Development Of A Non-Adhering Chemically Foamed-In-Place Polyurethane Cushioning Material For Packaging Purposes

Author(s): Childers, Sidney
Corporate Author: Materials Laboratory
Laboratory: Materials Laboratory
Date of Publication: 1958-01
Report Number: WADC TR 57-682
full text unavailable

Photochemical Synthesis Of Organic Fluorine Compounds

Author(s): Park, Joseph D.
Corporate Author: Department Of Chemistry, University Of Colorado
Laboratory: Materials Laboratory
Date of Publication: 1958-03
Report Number: WADC TR 56-590 Part 2
full text unavailable

Metal Cyclopentadienyl High-Temperature Lubricants And Related Materials. Part I. A. Synthesis And Properties Of Alkyl, Alkaryl, And Metalated Derivatives Of Ferrocene

Author(s): Rausch, Marvin
Corporate Author: Materials Laboratory
Laboratory: Materials Laboratory
Date of Publication: 1958-01
Report Number: WADC TR 57-62 Part 1
full text unavailable
full text unavailable

Determination Of Emissivity And Reflectivity Data On Aircraft Structural Materials

Author(s): Olson, O. Harry
Corporate Author: Armour Research Foundation
Laboratory: Materials Laboratory
Date of Publication: 1958-10
Report Number: WADC TR 56-222 Part 2 Supplement 1
AD Number: AD0202494
full text unavailable

The Effects Of Inelastic Action On The Resistance To Various Types Of Loads Of Ductile Members Made From Various Classes Of Metals Part IX. T-Section Eccentrically-Loaded Tension Members Made Of Type 304 Stainless Steel And TEsted At 1000 F

Author(s): Sidebottom, O. M.
Corporate Author: Dept. Of Theoretical And Applied Mechanics, University Of Illinois
Laboratory: Materials Laboratory
Date of Publication: 1958-10
Report Number: WADC TR 56-330 Part 9
full text unavailable

The Effects Of Inelastic Action On The Resistance To Various Types Of Loads Of Ductile Members Made From Various Classes Of Metals Part VIII. Eccentrically-Loaded Tension Members Made Of Two Stainless Steels Tested At Elevated Temperatures

Author(s): Sidebottom, O. M.
Corporate Author: Dept. Of Theoretical And Applied Mechanics, University Of Illinois
Laboratory: Materials Laboratory
Date of Publication: 1958-10
Report Number: WADC TR 56-330 Part 8
full text unavailable

Damping Energy Dissipation By Interfaces In Beam And Plate Supports And In Sandwich Cores

Author(s): Mentel, Theodore J.
Corporate Author: University Of Minnesota
Laboratory: Materials Laboratory
Date of Publication: 1958-12
Report Number: WADC TR 58-547
full text unavailable

A Study Of The Factors Influencing The Properties Of Heat Treatable Titanium Sheet Alloys

Author(s): Richards, R. S.
Corporate Author: Titanium Metals Corporation Of America
Laboratory: Materials Laboratory
Date of Publication: 1958-03
Report Number: WADC TR 57-639
full text unavailable

The Mechanical Properties Of Certain Aircraft Structural Metals At Very Low Temperatures

Author(s): McGee, Robert L.
Corporate Author: Battelle Memorial Institute
Laboratory: Materials Laboratory
Date of Publication: 1958-11
Report Number: WADC TR 58-386
full text unavailable

Metal Fiber Reinforced Ceramics

Author(s): Truesdale, R. S.
Corporate Author: State University Of New York College Of Ceramics At Alfred University
Laboratory: Materials Laboratory
Date of Publication: 1958-12
Report Number: WADC TR 58-452
full text unavailable

Development Of High Temperature Resistant Rubber Compounds

Author(s): Hayes, Robert A.
Corporate Author: Firestone Tire And Rubber Company
Laboratory: Materials Laboratory
Date of Publication: 1958-02
Report Number: WADC TR 56-331 Part 2
full text unavailable

Development and Evaluation Of Insulating Type Ceramic Coatings. Part I: Development And Small Scale Testing

Author(s): Sklarew, S.
Corporate Author: Marquardt Aircraft Co.
Laboratory: Materials Laboratory
Date of Publication: 1958-02
Report Number: WADC TR 57-577 Part 1
full text unavailable

Thermal Properties Of Certain Metals, Part II, Iron, Beryllium, Iridium, Palladium, Platinum, And Tungsten

Author(s): Goodwin, Thomas C.
Corporate Author: Library of Congress
Laboratory: Materials Laboratory
Date of Publication: 1958-09
Report Number: WADC TR 56-423 Part 2
full text unavailable

Effects Of Gamma Radiation On Linear Polyethylene

Author(s): Terrell, William B.
Corporate Author: Air Force Institute Of Technology; Materials Laboratory
Laboratory: Materials Laboratory
Date of Publication: 1958-02
Report Number: WADC TR 56-515
full text unavailable